/*
Please refer to readme.html for full Instructions

Text[...]=[title,text]

Style[...]=[TitleColor,TextColor,TitleBgColor,TextBgColor,TitleBgImag,TextBgImag,TitleTextAlign,TextTextAlign, TitleFontFace, TextFontFace, TipPosition, StickyStyle, TitleFontSize, TextFontSize, Width, Height, BorderSize, PadTextArea, CoordinateX , CoordinateY, TransitionNumber, TransitionDuration, TransparencyLevel ,ShadowType, ShadowColor]
*/

var FiltersEnabled = 1 // if your not going to use transitions or filters in any of the tips set this to 0

Text[0]=["Conformance","Each Standard stock receiver conforms to UL, CSA, or ASME requirements for 450 psi maximum working pressure.  Models with an internal diameter under six inches are UL listed; all larger models are made according to ASME code and tagged appropriately.<br><br>All pumpdowns are calculated at 80% capacity of liquid."]
Text[1]=["Limitations","Special Fittings and Fitting Locations on Receivers<br>Standard Refrigeration Company will furnish vessels with additional refrigerant fitting or change fitting sizes and locations, to suit your applications.<br><br>General Requirements<br>The edge of any fitting should be at least one inch from an adjacent fitting or weld.  Distances from the end of the receiver shell to the weld centerline are tabulated in table.  Only smaller fittings can be placed on the edge of the dome between the weld and the formed end. (The formed curve starts at 1/4xOD from the end.)<br><br>The range of fitting sizes and types readily available are:<br>*FPT 1/8 thru 4 inches<br>*IDS 3/8 thru 4 1/8 inches (steel)<br>*Rotalock Spuds 3/4inch-16, 1inch-14, 1 1/4inch-12, 1 3/4inch-12<br>*Liquid level indicator or alarm switch flanges<br>*Pipe or OD tube projections and special flanges can be installed depending upon sizes and availability. Consult factory<br>*Bulls-eyes can be supplied for installation in FPT connections<br>Other fittings are best described by their size and functions as *1/4inch FPT Purge fitting*"]
Text[2]=["Selection","Pumpdown Calculation Procedure:<br>Refer to table for calculating pumpdown capacity of any Standard receiver design with elliptical ends.  Pumpdown figures shown have been compensated to directly give capacity on 80% of the receiver volume filled with liquid at 90&deg;F.<br><br>To figure pumpdown capacity, locate the receiver OD in the first column and read across to find the values for length correction and pounds of pumpdown for refrigerant used.  Substitute those values in this formula:<br> Pumpdown = (overall length-length correction)x(pumpdown per inch)<br><br>To calculate overall length required for the given OD and specified pumpdown capacity, follow the same procedure given above, using this formula:<br> Overall length = (pumpdown required&divide;pumpdown per inch)+(length correction)"]
Text[3]=["Right","This tip Is right positioned"]
Text[4]=["Center","This tip Is center positioned"]
Text[5]=["Left","This tip Is left positioned"]
Text[6]=["Float","This tip Is float positioned at a (10,10) coordinate, It also floats with the scrollbars so it is always static"]
Text[7]=["Fixed","This tip Is fixed positioned at a (1,1) coordinate"]
Text[8]=["sticky style","This tip will sticky around<BR>This is useful when you want to insert a link like this <A href='http://migoicons.tripod.com'>Home Page</A>"]
Text[9]=["keep style","This sticks around the mouse"]
Text[10]=["Left coordinate control","This tip is right positioned with a 40 X coordinate "]
Text[11]=["Top coordinate control","This tip is right positioned with a 50 Y coordinate"]
Text[12]=["Visual effects","This tip has a Shadow and is Transparent a little and also has a random Transition applied to it "]
Text[13]=["different style","Wow this is a new style and position! "]
Text[14]=["This is The title","this is the text"]
Text[15]=["","This is only text"]
Text[16]=["","Some Lists <li>list one</li> <li>list two</li> <li>list three</li> <li>list four</li>"]


Style[0]=["white","3366CC","#969696","#ffffff","","","","","","","","","","",300,"",2,4,10,10,,1,0,"",""]
Style[1]=["white","black","#000099","#E8E8FF","","","","","","","center","","","",200,"",2,2,10,10,"","","","",""]
Style[2]=["white","black","#000099","#E8E8FF","","","","","","","left","","","",200,"",2,2,10,10,"","","","",""]
Style[3]=["white","black","#000099","#E8E8FF","","","","","","","float","","","",200,"",2,2,10,10,"","","","",""]
Style[4]=["white","black","#000099","#E8E8FF","","","","","","","fixed","","","",200,"",2,2,1,1,"","","","",""]
Style[5]=["white","black","#000099","#E8E8FF","","","","","","","","sticky","","",200,"",2,2,10,10,"","","","",""]
Style[6]=["white","black","#000099","#E8E8FF","","","","","","","","keep","","",200,"",2,2,10,10,"","","","",""]
Style[7]=["white","black","#000099","#E8E8FF","","","","","","","","","","",200,"",2,2,40,10,"","","","",""]
Style[8]=["white","black","#000099","#E8E8FF","","","","","","","","","","",200,"",2,2,10,50,"","","","",""]
Style[9]=["white","black","#000099","#E8E8FF","","","","","","","","","","",200,"",2,2,10,10,51,0.5,75,"simple","gray"]
Style[10]=["white","black","black","white","","","right","","Impact","cursive","center","",3,5,200,150,5,20,10,0,50,1,80,"complex","gray"]
Style[11]=["white","black","#000099","#E8E8FF","","","","","","","","","","",200,"",2,2,10,10,51,0.5,45,"simple","gray"]
Style[12]=["white","black","#000099","#E8E8FF","","","","","","","","","","",200,"",2,2,10,10,"","","","",""]

applyCssFilter()