/*
Please refer to readme.html for full Instructions

Text[...]=[title,text]

Style[...]=[TitleColor,TextColor,TitleBgColor,TextBgColor,TitleBgImag,TextBgImag,TitleTextAlign,TextTextAlign, TitleFontFace, TextFontFace, TipPosition, StickyStyle, TitleFontSize, TextFontSize, Width, Height, BorderSize, PadTextArea, CoordinateX , CoordinateY, TransitionNumber, TransitionDuration, TransparencyLevel ,ShadowType, ShadowColor]
*/

var FiltersEnabled = 1 // if your not going to use transitions or filters in any of the tips set this to 0

Text[0]=["Features","Patented spiral tube design with enhanced surface produces optimum turbulent flow and the highest heat transfer coefficients.<br><br>The tightly-jacketed outer tube works in tandem with the enhanced surface spiral inner tube to produce minimum pressure drop and maximum heat transfer efficiency.<br><br>Two-piece construction with rugged, high-temperature braze joints for fast, easy installation.<br><br> 10 SLC (copper) models from 1/2 to 20 hp<br> 5 SLS (carbon steel) models from 25 to 50 hp.<br><br>Custom designs in copper or carbon steel are available to precisely fit your most exacting application requirements.<br><br>All models are UL and CSA listed."]
Text[1]=["Selection","Nominal SLC and SLS selections should be based on system horsepower. This should provide a nominal 10&deg;F subcooling and a nominal 20&deg;F suction superheat for R-22 and R-502, at 110&deg;F condensing, 25&deg;F suction. (ex. A 3 hp system requires and SLC-3) Do not select an undersized model to avoid high suction pressure drops and gas whistling. Models selected based on system hp and liquid line sizes are applicable for standard low, medium, and high temperature refrigeration systems.<br><br>Oversized models can provide additional liquid subcooling, and suction superheat. However, proper compressor performance can only be attained if the suction gas temperature to the compressor is not raised above 65&deg;F."]
Text[2]=["Application","Mechanical subcooling can be added to existing systems or designed into new ones.  It is ideal for any refrigeration process where more capacity may be necessary, or where operating costs must be lowered.  Often subcooling can be added using existing air-conditioning equipment to provide the subcooling input.  Mechanical subcooling is recommended for:<br><br> *Supermarkets - Especially where present capacity is strained or additional loads (refrigerant cases) are being installed.<br> *Warehousing/Processing - To handle new load requirements or to permit expansion of the facilities.<br> *Industrial - To produce more capacity for changing product conditions or additional equipment.<br><br>Mechanical subcooling has proven cost efficient in a variety of applications.  Additional equipment costs required for retrofit installations, in some instances, have been returned within three to six months due to lower energy usage.  Further, subcooling has eliminated the need to scrap existing systems which have become overloaded.  And in new system design, subcooling not only delivers more uniform, efficient operation, but also allows down sizing of some components like compressors and control valves."]
Text[3]=["Load Factors","Evaporating<br>Temperature  &nbsp;&nbsp;+40  &nbsp;&nbsp;+20  &nbsp;&nbsp;&nbsp;0&nbsp;  &nbsp;&nbsp;-20  &nbsp;&nbsp;-40<br><br>from120&deg;F.<br>=70&deg; Range  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;.20  &nbsp;&nbsp;.20  &nbsp;&nbsp;.21  &nbsp;&nbsp;.22  &nbsp;&nbsp;.22<br><br>from110&deg;F.<br>=60&deg; Range  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;.19  &nbsp;&nbsp;.19  &nbsp;&nbsp;.20  &nbsp;&nbsp;.20  &nbsp;&nbsp;.21<br><br>from 100&deg;F.<br>=50&deg; Range  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;.18  &nbsp;&nbsp;.18  &nbsp;&nbsp;.19  &nbsp;&nbsp;.19  &nbsp;&nbsp;.20"]
Text[4]=["Center","This tip Is center positioned"]
Text[5]=["Left","This tip Is left positioned"]
Text[6]=["Float","This tip Is float positioned at a (10,10) coordinate, It also floats with the scrollbars so it is always static"]
Text[7]=["Fixed","This tip Is fixed positioned at a (1,1) coordinate"]
Text[8]=["sticky style","This tip will sticky around<BR>This is useful when you want to insert a link like this <A href='http://migoicons.tripod.com'>Home Page</A>"]
Text[9]=["keep style","This sticks around the mouse"]
Text[10]=["Left coordinate control","This tip is right positioned with a 40 X coordinate "]
Text[11]=["Top coordinate control","This tip is right positioned with a 50 Y coordinate"]
Text[12]=["Visual effects","This tip has a Shadow and is Transparent a little and also has a random Transition applied to it "]
Text[13]=["different style","Wow this is a new style and position! "]
Text[14]=["This is The title","this is the text"]
Text[15]=["","This is only text"]
Text[16]=["","Some Lists <li>list one</li> <li>list two</li> <li>list three</li> <li>list four</li>"]


Style[0]=["white","3366CC","#969696","#ffffff","","","","","","","","","","",400,"",2,4,10,10,,1,0,"",""]
Style[1]=["white","black","#000099","#E8E8FF","","","","","","","center","","","",200,"",2,2,10,10,"","","","",""]
Style[2]=["white","black","#000099","#E8E8FF","","","","","","","left","","","",200,"",2,2,10,10,"","","","",""]
Style[3]=["white","black","#000099","#E8E8FF","","","","","","","float","","","",200,"",2,2,10,10,"","","","",""]
Style[4]=["white","black","#000099","#E8E8FF","","","","","","","fixed","","","",200,"",2,2,1,1,"","","","",""]
Style[5]=["white","black","#000099","#E8E8FF","","","","","","","","sticky","","",200,"",2,2,10,10,"","","","",""]
Style[6]=["white","black","#000099","#E8E8FF","","","","","","","","keep","","",200,"",2,2,10,10,"","","","",""]
Style[7]=["white","black","#000099","#E8E8FF","","","","","","","","","","",200,"",2,2,40,10,"","","","",""]
Style[8]=["white","black","#000099","#E8E8FF","","","","","","","","","","",200,"",2,2,10,50,"","","","",""]
Style[9]=["white","black","#000099","#E8E8FF","","","","","","","","","","",200,"",2,2,10,10,51,0.5,75,"simple","gray"]
Style[10]=["white","black","black","white","","","right","","Impact","cursive","center","",3,5,200,150,5,20,10,0,50,1,80,"complex","gray"]
Style[11]=["white","black","#000099","#E8E8FF","","","","","","","","","","",200,"",2,2,10,10,51,0.5,45,"simple","gray"]
Style[12]=["white","black","#000099","#E8E8FF","","","","","","","","","","",200,"",2,2,10,10,"","","","",""]

applyCssFilter()